MK Feeders

MK
JAE-MK7Wx feet Has 7-pin (W-Clocked) Amphenol connectors at both ends of a 7-conductor cable, male at one end, female at the other.
JAE-MK7Sx feet Has 7-pin (S-Clocked) Amphenol connectors at both ends of a 7-conductor cable, male at one end, female at the other.
JAP-MK7W10x1 This will adapt a MK Cobra, Python or Prince XL torch with a 7-pin (W- clocked) Amphenol to the old style Brute feeder that had the 10-pin (S-clocked) Amphenol connector. One foot in length.
JAP-MK7W-7Sx1 This will adapt a MK Cobra, Python or Prince XL torch with a 7-pin (W-clocked) Amphenol to the older style plastic door cabinets that had a 7-pin (S-clocked) Amphenol connector. One foot in length.
Lincoln
JAP-MKC-3MS Used to connect a MK feeder to Lincoln SP-250,SP-225 and WM-250 with spade connectors.
JAP-MK-L14 Used to hook-up a MK feeder to the Lincoln welders that have a 14-pin (X-clocked) Amphenol connector.
JAP-MK-U1 Used to connect a MK feeder (contactor only) to the Lincoln Wire-matic series and the Power-MIG 255.
JAP-MK-LSP200 Used to connect a MK feeder (contactor only) to the Lincoln SP-150 and SP-200 welders.
JAP-MK-LTS Used to connect MK feeder to older Lincoln welders with terminal strip.
JAP-MK-L6 Used to connect MK feeder to Lincoln CC welders that have the 6-pin Amphenol connector.
JAP-MK-L5 Used to connect MK feeder to Lincoln CC welders that have the 5-pin Amphenol connector.
JAE-L14-MKTSx Feet Has Lincoln14-Pin connector on a 5- conductor cable with forked tongue terminals at the other end. (Set up to fit a MK Cobra Cabinet)
JAC-MKSG-LSP200 Used to connect the MK Prince XL Spool Gun to the Lincoln SP-200 using the Lincoln WFS to control the Prince.
Thermal Arc
JAE-H19-MKTS x Feet Has Hobart- Thermal Arc 19 Pin connector on a 5- conductor cable with forked tongue terminals at the other end. (Set up to fit a MK Cobra Cabinet)
JAP-MK-H19 Used to hook-up MK feeder to either the Hobart or Thermal Arc welders that have a 19-pin Amphenol connector.
JAP-MK-HSC Used to connect MK feeder to the Hobart Beta-Mig welders that have spade connectors on the trigger circuit.
JAP-MK-H5 Used to connect MK feeder to the older Hobart welders with a 5- pin Amphenol connector.
Miller
JAE-M14-MKTS x Feet Has Miller 14- Pin connector on a 5- conductor cable with forked tongue terminals at the other end. (Set up to fit a MK Cobra Cabinet)
JAC-MKSG-M185 Used to connect MK feeder to older Miller welders with Hubbel twist-lock connectors.
JAP-MK-MTL Used to connect MK feeder to older Miller welders with Hubbel twist-lock connectors.
JAP- MK-U1 Used to connect MK feeder (Contactor only) to the Millermatic 35,200,250,250X and 300 welders.
JAP-MK-M14 Used to connect MK feeder to Miller welders that have a 14-pin (S-clocked) Connector.
JAC-MK-M250CP Used to connect MK feeder (contactor only) to Millermatic 250, Miller Vintage, Hobart Beta-MIG2510 and Ironman 250.
ESAB
JAE-E19-MKTS x Feet Has ESAB 19-Pin connector on a 5- conductor cable with forked tongue terminals at the other end. (Set up to fit a MK Cobra Cabinet)
JAP-MK-LMM-250 Used to connect MK feeder to the L-TEC/ESAB MigMaster 250 or 251 welder.
JAP-MK-LMM-300i Used to connect MK feeder to the ESAB MigMaster 300i welder.
JAP-MK-E19 Used to hook-up MK feeder to ESAB welders that have a 19-pin Amphenol connector.
JAP-MK-E7 Used to hook-up MK feeder to the older Linde welders with the 7-pin Plastic Amp connector.
JAP-MK-E6 Used to hook-up MK feeder to the very old Linde welders with the 6-pin Triploc connector.
Pow Con
JAE-P14-MKTS x Feet Has Pow Con 14-Pin connector on a 5- conductor cable with forked tongue terminals at the other end. (Set up to fit a MK Cobra Cabinet)
JAC-48-25 Used to connect the MK 7-pin (W-clocked) torches to Fronius welders.

 

About Us | Privacy Policy | Contact Us | ©2005 Justarc.com